Lynk Wireless Ektor Razor Surface Mount Professional Edgelite Emergency Exit 24m - Black
Single and double-sided decals
Soft-start charger to reduce building load
Available in low illumination area black model
Fast emergency switch-over (<0.5s) for high-task areas
Chain and rod mounting with Surface and Rod Mount Kit
Long life electronics
12 years design life at max. ambient
High Quality Lithium battery (LiFePO4) and smart charger
Self test (AS2293/IEC62034)
Fully compliant (AS/NZS 2293)
Selected Models
DALI (IEC 62386-202) DT1
Ektor wired monitored system
Wireless meshing system
IEC 62386 over IEC 62386-104
Wireless monitoring via Ektor Lynk
MECHANICAL
Body Material
Polycarbonate
Diffuser Material
PMMA
Fitting Colour
Black
Installation Type
Recessed
IP Rating
IP20
ELECTRICAL
Electrical Rating
Class II
Input Frequency
50 Hz
Input voltage
230Vac
In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Maximum Wattage
2 W
Standby Power
1.7 W
Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge.
Working Temp Range
0 to 40 °C
EMERGENCY (EM SUFFIX)
Replacement Battery Code
13845
Emergency Classification
"C0:E12.5, C90:E6.3"
Emergency Control
IEC62386-104 (Wireless DT1)
DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202.
Decal Size
300 x 150 mm
Emergency Duration
90 mins
Emergency Light Source Life
40Y/06M
AS2293.3-2018 Projection of Light source life for LED Exit signs (appendix E) Defines the projected time until the surface luminance falls below the minimum required surface luminance for an exit sign.
Emergency Lumen Output
120 lm
Emergency Mode
Maintained
Emergency Output Power
350 mW
Viewing Distance
24 m
DRIVER
Driver Included
Yes
Driver Type
Wireless (IEC62386-104) with DT1
Flex & Plug or Lead Length
1200 mm
Wiring Type
Re-wireable terminal block (5 pin)
COMPLIANCE
Product Design Life
12 years
The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use.
Daily Use
24 hrs
The Daily Use is the recommended time required to meet the product's design life. Installations can exceed this time, however the product design life will be reduced proportionally.
