Fast emergency switch-over (<0.5s) for high-task areas
Long life electronics
12 years design life at max. ambient
High Quality Lithium battery (LiFePO4) and smart charger
Standalone (SPU)
Self test (AS2293/ IEC62034)
DALI (IEC62386-202) DT1
Selected Models
Ektor wired monitored system
DALI (IEC62386)
MECHANICAL
Adjustability
Adjustable
Body Material
Polycarbonate
Diffuser Material
Polycarbonate
Fitting Colour
Black
IK Rating
IK08
Installation Type
Surface mount
IP Rating
IP65
ELECTRICAL
Electrical Rating
Class I
Input Current
0.1 A
Input Frequency
50 Hz
Input voltage
230Vac
In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Maximum Wattage
3 W
Standby Power
0.25 W
Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge.
Working Temp Range
0 to 40 °C
EMERGENCY (EM SUFFIX)
Replacement Battery Code
01303
Emergency Control
DALI Monitored (DT1)
DALI Monitored~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202.
Emergency Duration
90 mins
Emergency Lumen Output
416 lm
Emergency Mode
Non-Maintained
Emergency Output Power
5500 mW
DRIVER
Driver Included
Yes
Driver Type
DALI DT1 Emergency
Wiring Type
Re-wireable terminal block (6 pin)
COMPLIANCE
Product Design Life
12 years
The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use.
