High Quality Lithium battery (LiFePO4) and smart charger
Self test (AS2293/IEC62034)
Fully compliant (AS/NZS 2293)
DALI monitored emergency control
Emergency monitoring with capabilities via cloud systems such as zencontrol
Selected Models
DALI (IEC 62386-202) DT1
Ektor wired monitored system
Wireless meshing system
IEC 62386 over IEC 62386-104
Wireless monitoring via Ektor Lynk
MECHANICAL
Body Material
Polycarbonate
Diffuser Material
PMMA
Fitting Colours
White / Black
Installation Type
Surface Mount
IP Rating
IP20
ELECTRICAL
Electrical Rating
Class II
Input Frequency
50 Hz
Input voltage
230Vac
In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Maximum Wattage
2.6 W (White) 2 W (Black)
Standby Power
2.3 W (White) 1.7 W (Black)
Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge.
Working Temp Range
0 to 40 °C
EMERGENCY (EM SUFFIX)
Replacement Battery Code
13972
Emergency Classification
"C0:E6.3, C90:E10"(White)
Emergency Control
DALI Monitored (DT1)
DALI Monitored ~ Supports Emergency test and monitoring over DALI (IEC62386) with full compliance to IEC62386-202.
Decal Size
300 x 150 mm
Emergency Duration
90 mins
Emergency Light Source Life
34Y/04M (White) 51Y/01M (Black)
AS2293.3-2018 Projection of Light source life for LED Exit signs (appendix E) Defines the projected time until the surface luminance falls below the minimum required surface luminance for an exit sign.
Emergency Mode
Maintained
Emergency Output Power
650mW (White) 350mW (Black)
Viewing Distance
24 m
DRIVER
Driver Included
Yes
Integrated Driver
Yes
Driver Type
DALI DT1 Emergency
Flex & Plug or Lead Length
650 mm
Wiring Type
Re-wireable terminal block (5 pin)
COMPLIANCE
Product Design Life
8 years
The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use.
Daily Use
24 hrs
The Daily Use is the recommended time required to meet the product's design life. Installations can exceed this time, however the product design life will be reduced proportionally.
