Wall, ceiling and rod mounting (with rod mount kit)
High quality LiFePO4 battery
Available in black or white
Selected Models
Works with DALI-2 wired monitoring control systems
Works with Lynk wireless monitoring control systems
MECHANICAL
Body Material
Polycarbonate
Fitting Colour
White / Black
Installation Type
Surface mount
IP Rating
IP65
ELECTRICAL
Electrical Rating
Class II
Input Frequency
50 Hz
Input voltage
230Vac
In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6%
Maximum Wattage
2 W
Standby Power
0.4 W
Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge.
Working Temp Range
0 to 40 °C
EMERGENCY (EM SUFFIX)
Replacement Battery Code
18096
Emergency Classification
C0:D63, C90:D63
Emergency Control
IEC62386-104 (Wireless DT1)
IEC62386-104~ Supports wireless test and monitoring over IEC62386-104 using IEC62386-202.
Emergency Duration
90 mins
Emergency Lumen Output
320 lm
Emergency Mode
Non-Maintained
Emergency Output Power
2200 mW
DRIVER
Driver Included
Yes
Integrated Driver
Yes
Driver Type
Wireless (IEC62386-104) with DT1
Wiring Type
Re-wireable terminal block (3 pin)
COMPLIANCE
Product Design Life
8 years
The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use.
